







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Trusted Fence Installation for Richardson Homeowners
A leaning post, a gate that drags, or boards that pop loose after a summer storm: by the time a fence gets to that point, patching it usually costs more than it’s worth. Fence installation in Richardson is a property-line job, and Richardson’s clay-heavy soil and flat lots make it different from fence work in other North Texas towns. We work with independent local professionals who know how our ground swells and shifts through the wet spring and dries hard in July. Every job is measured, laid out against your survey, and built to the spec rather than down to a price. Our technicians have up to 12 years of experience, and our fencing work draws on proven material lines instead of house-brand unknowns. Call (844) 320-6637 to talk through your fence line and get a free estimate.
What Our Fence Installation Service Includes
Your fence is one project with a lot of moving parts: material, post spacing, gate hardware, and how the whole run handles your lot’s grade. We handle the planning, the material specification, and the installation as one job, so nothing falls between trades. Here’s what each fence type involves and when it’s the right call.
Wood Fence
Wood fencing is the most common privacy choice in Richardson, and cedar is the pick we recommend most often for its looks and how it holds up in our summers. We build wood fence to a consistent post depth and rail spacing so the run stays straight instead of following every dip in the ground. Homeowners choose wood when they want a natural look, a privacy screen, or a design that matches an existing fence line.

Chain Link Fence
Chain link is the practical choice for a pool barrier, a pet enclosure, or a large perimeter where budget matters and privacy doesn’t. We set galvanized posts and tension the mesh so it stays tight at the gate corners, which is where chain link usually sags first. It’s also a good fit for corner lots and alley lines in Richardson where a solid fence would cut airflow.

Vinyl Fence
Vinyl gives you a clean, uniform look with no repainting or staining, which suits a lot of newer builds. We work with Bufftech and ActiveYards vinyl systems because their profiles hold their color and their panels stay put in the heat. Typical estimated vinyl fence installation in Richardson runs $3500 – $9000, and the written estimate sets the final price.

Aluminum Fence
Aluminum is the standard for pool and front-yard fencing: it meets setback visibility needs and doesn’t block the view of a landscaped yard. We install Jerith and Barrette aluminum systems, both designed for residential grade and built to stay level over our soil. Aluminum makes sense when you need security without a solid wall effect, and typical estimated aluminum fence installation in Richardson runs $4000 – $10000.
Iron Fence
Ornamental iron and steel fencing gives you the heaviest-duty look and the longest service life for a front yard or a formal property line. We set iron posts in concrete and align the pickets so the run reads clean from the street. It’s the right call when you want permanence and a classic look that works with Richardson’s brick and stone homes.
Fence Repair
Not every fence needs replacing. We look at posts, rails, panels, and gate hardware and tell you honestly whether a repair will hold or whether you’re throwing money at a failing structure. Common repairs include resetting or replacing rotted posts, replacing storm-damaged panels, and rehanging gates that have dropped. If repair makes sense, that’s what we’ll recommend; if the posts are gone, we’ll say so.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Brands We Work With for Fence Installation
We specify fence materials by name because brand tells you something about how a fence will hold up after ten summers. For aluminum, we work with Jerith and Barrette, both well known for residential ornamental systems with consistent powder coating and hardware that doesn’t seize. For vinyl, we work with Bufftech and ActiveYards, whose panel profiles hold color and stay stable in the Texas heat.
Those brands also matter at repair time. When we service a Bufftech or ActiveYards vinyl fence, we know where the panels lock together and where the posts are likely to move first. Same with Jerith and Barrette aluminum: knowing the rail brackets and post caps helps us make a repair that matches the original. Whether you have one of those brands or any other make, we can help you sort out repair or replacement.
Signs You Need Fence Installation Right Now
- Posts leaning after a storm or a wet spring. Clay soil swells and then dries hard, and a post that isn’t set deep enough will start to lean. One leaning post often means the ones beside it are on their way.
- Boards popping, warping, or splitting. A wood fence doing this along a long run means the material is failing, not that one board was bad. Patching single boards rarely buys you more than a season.
- A gate that drags or won’t latch. Gate swing problems usually mean hinge or post failure, not a minor adjustment. A gate that won’t close is also the part of the fence that matters most.
- Rotted post bottoms or loose concrete footings. Post rot starts below grade where you can’t see it, and a post that wobbles at the ground has already lost its footing. This is what turns a fence from a screen into a hazard in high wind.
- Rust, peeling paint, or panels that rattle. Rust at the welds and paint peeling in sheets mean the coating is finished. On aluminum and iron, that’s the point where replacement usually costs less than ongoing repairs.
Our Fence Installation Process – Step by Step
- 1
Walk the property and check the survey. Before anything is measured, we locate your platted property line so the new fence doesn’t create a boundary dispute. Where set-back rules or HOA guidelines apply, we sort those out first. Most Richardson fence projects start with a conversation about the line and the lot grade.
- 2
Specify the material and the layout. We talk through wood, vinyl, aluminum, or iron and match the material to what you’re trying to do: privacy, pet containment, pool code, or a front-yard look. Post spacing, rail count, and gate placement get decided here, not on the fence line.
- 3
Set the posts correctly for our soil. We dig and set posts to a proper depth with concrete footings so the fence holds against clay soil movement and summer heat. Post setting is the part of the job nobody sees and the part that decides whether the fence stays straight.
- 4
Build the panels and hang the gates. Rails and panels go up plumb and aligned to the run, then gates are fitted with hardware built for the load. We check every gate’s swing and latch before we finish, because a gate that catches on day one only gets worse.
- 5
Walk the finished fence with you. We walk the line, show you the gate hardware, and leave you with the material specs. If any part of the run needs a follow-up, you have one contractor to call, which is the whole point of working with us across categories.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Fence Installation Cost in Richardson?

Fence installation in Richardson typically falls into two material brackets: vinyl fence installation at an estimated $3500 – $9000, and aluminum fence installation at an estimated $4000 – $10000. Those ranges are typical for a residential yard, and the written estimate sets the final price once we’ve seen the run.
What moves the number is the length of the fence line, the material grade, how many gates you need, and what’s underneath. Rocky ground, a run that crosses a retaining wall, or a lot with bad grading all add work. Pool fencing and corner lots often need extra posts at transitions. Aluminum and iron cost more than wood upfront and give you a longer lifespan with less upkeep, so the material choice is part of the budget conversation, not an afterthought.
To avoid overpaying, ask for a written line-item quote that names the material, the post spacing, and the gate count. Skip any quote that’s a single number with no breakdown. Our free estimate includes a property walk, material options, and the exact scope so you can compare bids on the same terms.
| Fence type | Typical estimated range |
|---|---|
| Vinyl fence installation | $3500 – $9000 |
| Aluminum fence installation | $4000 – $10000 |
Fence Installation Near Richardson – Our Service Area
We work with homeowners in Richardson and the surrounding communities, including Plano, Addison, University Park, Farmers Branch, Highland Park, Carrollton, The Colony, Frisco, Coppell, Lewisville, and Dallas. Response times vary by location and by scheduling, so call and we’ll tell you what’s open. Homeowners nearby can read about fence installation in their own community, and neighbors in fence installation can see the same approach there.
Serving Richardson, TX – Our Local Coverage Area
We serve Richardson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Fence Installation in Richardson

Fence installation is the process of setting posts, building panels, and hanging gates to create a new boundary fence or privacy screen. It starts with a property survey and a material choice, then moves to post setting and assembly. It’s the alternative to repairing a failing fence and the right call when the existing structure is past patch work.
A typical residential fence takes a few working days once the material is on site and the ground is ready. Length, gates, and access to the line drive the timeline. We give you a schedule with the written estimate so you know what to expect.
Vinyl runs an estimated $3500 – $9000 and aluminum an estimated $4000 – $10000 for a typical residential run, with the written estimate setting the final price. Length, material grade, gate count, and site conditions are what move the number. Call (844) 320-6637 for an exact quote. Estimates are free.
Yes. We work with Jerith and Barrette aluminum systems and Bufftech and ActiveYards vinyl, and we can service those brands for repair as well as new install. Knowing the profile and hardware means a repair matches the original fence. Whether you have one of those brands or another make, we can work with it.
Same-day work is available depending on scheduling. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. We’re closed on Saturday, and a call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Materials carry their manufacturer warranties, and our installation carries a workmanship warranty. The written estimate spells out both. If something needs attention after the job, one contractor is on the other end of it.
Clear the fence line of planting, furniture, and anything stored against the house, and make sure we can reach the line with material. Have your survey handy if you have it. Fencing ties in neatly with our other work, so if you’re also planning a yard or entry project you can see construction richardson for the full picture.
Schedule Your Fence Installation Service in Richardson Today
Whether you’re replacing a fence that’s leaning into the neighbor’s yard or starting fresh on a new build, one contractor from estimate to finished line keeps the project simple. Call (844) 320-6637 for a free, no-obligation estimate on your fence installation in Richardson. We answer 24/7, and fast dispatch runs from 7am to 7pm, Sunday through Friday. If you have questions first, the team at Construction Richardson is glad to help.
Written by the team at Construction Richardson.












