







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Driveway & Pavers Across Farmers Branch
If your driveway has settled, cracked, or you’re planning a paver upgrade, you’re in the right place. We handle driveway and paver work throughout Farmers Branch, from the older ranch blocks in the 75234 core to the newer infill streets near the transit and retail corridors. Farmers Branch is a small, landlocked inner-ring suburb, and that shapes the work here: most of what we do is rebuild and remodel on tight, established lots, not greenfield subdivision construction. Knowing how this city permits, inspects, and drains is half the job. Call (844) 320-6637 for a free estimate.
Why Farmers Branch Homeowners Call Construction Richardson for Driveway & Pavers

Farmers Branch is a town where the code enforcement and permitting culture is unusually hands-on for its size, and that reputation is earned. Once you’ve pulled driveway permits inside Farmers Branch boundaries and absorbed what the inspection review actually looks at, the process stops being a mystery. We work inside that process routinely: the scope of work, the base preparation, and the inspection sign-off are planned as one job, not handled as loose ends after the pour.
Our technicians have up to 12 years of experience with concrete, pavers, and asphalt across North Texas, including the expansive black clay that runs under every lot in Farmers Branch. We’re a single-source residential contractor, so if your driveway project touches grading, drainage, or a foundation concern, you’re not the one coordinating separate trades. Structural or cosmetic, we handle both, and one contractor stays accountable from permit to punch list.
Response time to Farmers Branch is short because we’re already working this part of Dallas County every week. Call (844) 320-6637 and we answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Driveway & Pavers Services in Farmers Branch
Farmers Branch driveways fail and get rebuilt in a few recognizable ways. Here’s what each of our main services does about them.
Paver Driveways in Farmers Branch
A paver driveway is the upgrade most farmers branch homeowners ask about first, and for good reason: pavers tolerate the seasonal soil movement here far better than a rigid slab, and a single cracked unit can be lifted and reset instead of replacing the whole pour. The catch is the base. Installed over an unprepared subgrade with no edge restraint, pavers rut under wheel loads, especially near the garage apron where turning forces concentrate. We build from a compacted select-fill base up, using systems from Techo-Bloc and Tremron.

Concrete Driveways & Concrete Work in Farmers Branch
Builder-grade concrete poured too thin over black clay is the single most common problem we see on the newer streets in Farmers Branch. Settlement, map cracking, and uneven joints show up within a few seasons. The fix is not a cosmetic overlay: failed sections come out, a compacted select-fill base goes in, and slope is verified to move water away from the slab and foundation before anything new is placed. Stamped concrete gives you pattern and color without the paver budget, provided the base is right underneath it.

Asphalt Driveways & Resurfacing in Farmers Branch
Asphalt is the value option for Farmers Branch lots where the base is sound but the surface has oxidized and raveled under the Texas sun. Resurfacing restores a clean, uniform driving surface and re-establishes the crown so runoff heads to the street instead of the foundation. Where the base has failed, patching first and sealing after gets more years out of the existing pavement than a full replacement.

Driveway Repair & Replacement in Farmers Branch
On Farmers Branch’s tighter ranch lots, scraping and rebuilding is increasingly common, and driveway replacement often follows a teardown or addition because the original approach no longer meets the new garage height or setback. We handle partial replacement, full replacement, sealing, and joint repair. Sealing runs $250 – $700 and is the cheapest way to slow surface deterioration on a driveway that’s still structurally sound.
Patios, walkways, and pool decks round out the work, using the same base preparation standards and materials from Unilock and Cambridge Pavers. If you’re weighing your options, our driveway & pavers team can walk you through the tradeoffs by material and cost.
Trusted Brands We Service in Farmers Branch
Material choice should be specified by name, not by guesswork. For pavers and retaining walls we work with nationally recognized systems from Unilock, Tremron, Techo-Bloc, and Cambridge Pavers, each carrying manufacturer warranties that mean something when a unit fails. We match the material to the project: a driveway takes a different paver and base spec than a patio or walkway, and the brand lineup lets us get the right one rather than the closest available. Because we work with these manufacturers directly, turnaround on material lead times stays predictable and we’re never limited to a house-brand substitute.
See the difference
Before
After
Before
After
Before
AfterCommon Driveway & Pavers Problems We See in Farmers Branch Homes
- Builder-grade concrete over unprepared clay. A new drive poured thin over uncompacted black clay will settle and crack within a few seasons, no matter how good it looks on day one. The failure is under the slab, not on it.
- Pavers with no compacted base or edge restraint. Without a properly compacted base and a rigid edge, pavers shift and rut under wheel loads, and the garage apron is where it shows first. Reset units won’t stay put until the base is corrected.
- Drainage skipped or done without permits. Water ponding against the foundation is a steady problem in Farmers Branch, and correcting grading after the fact draws code enforcement attention in a city known for hands-on review. Permits and inspection belong in the scope from the start.
- The 75234 core’s black clay soil. Even on newer infill lots, expansive clay heaves and shrinks with the drought-to-flood swings North Texas gets, so a driveway that lacks proper subgrade prep and drainage will move. Contractors here often have to re-engineer the base rather than pour over existing soil.
Pricing for Driveway & Pavers in Farmers Branch, TX

Pricing in Farmers Branch is set per job by the written estimate, because base preparation, drainage corrections, and inspection requirements vary from lot to lot. The ranges below are typical and estimated, not quotes.
| Service | Typical Estimated Range |
|---|---|
| Paver Driveway Installation | $7000 – $18000 |
| Concrete Driveway Installation | $4500 – $12000 |
| Driveway Replacement | $5000 – $14000 |
| Driveway Sealing | $250 – $700 |
A paver driveway in Farmers Branch typically runs $7,000 – $18,000, with the spread driven by square footage, paver selection, and how much base correction the clay requires. Concrete driveway installation typically runs $4,500 – $12,000. Asphalt paving typically runs $3,500 – $9,000, while a full driveway replacement runs $5,000 – $14,000. Thicker sections, tight-lot staging on the older ranch blocks, and permit/inspection scope all move the number. The written estimate sets the final price. Estimates are free: call (844) 320-6637.
We Also Serve Cities Near Farmers Branch
Because Farmers Branch sits surrounded by Dallas, Carrollton, and Addison, we regularly work the neighborhoods just across the line. We also serve Addison, Carrollton, Irving, and Coppell, and the same black-clay base preparation and inspection discipline applies across all of them. Call (844) 320-6637 to schedule a free estimate in Farmers Branch or any nearby city.
Serving Farmers Branch, TX – Our Local Coverage Area
We serve Farmers Branch and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Driveway & Pavers in Farmers Branch

Not if it’s done correctly and inspected. Farmers Branch’s permitting and inspection review is stricter than surrounding Dallas County jurisdictions, and a permitted, inspected replacement protects your position rather than undermining it. Get the scope and inspection sign-off in writing before work starts so you have documentation if a warranty question ever comes up. Call (844) 320-6637 for an exact quote; estimates are free.
HOAs in newer Farmers Branch developments typically require architectural review before installation, and they usually restrict color, pattern, and material type. Submit your paver selection and layout for approval before ordering units, not after. We can help document the material spec (brand, color, and pattern) so the HOA review moves faster. Call (844) 320-6637 to walk through your options.
Black clay soil plus thin concrete and unprepared subgrade. On newer streets, a common call is a builder-grade concrete driveway that has settled unevenly because the original pour was too thin and the expansive clay beneath it was not properly compacted. The usual fix is removal and replacement of failed sections, a compacted select-fill base, and verified slope away from the slab and foundation, all under permit. Call (844) 320-6637 for an assessment.
In most cases, yes, especially when the work involves grading, drainage, or replacement rather than minor repair. Farmers Branch’s permitting and inspection review is unusually hands-on for a town its size, so confirm the requirement with the city’s building department before work starts. Permits pulled and inspections passed are part of the job, not an extra. Call (844) 320-6637 for a free estimate.
Compare the base specification and inspection scope before the surface. A cheaper concrete bid that skips compacted select-fill or permits will cost more over time on Farmers Branch’s clay, and a paver bid without edge restraint is a rut waiting to happen. Ask what base material, thickness, and compaction method each bid includes, and whether permits and inspection are in scope. Call (844) 320-6637 for a line-item estimate.
Whether you’re replacing a settled concrete drive on a newer Farmers Branch street or upgrading to pavers on an older ranch lot, the base under the surface is what determines how long the work lasts. We build from the subgrade up, work within this city’s permitting and inspection expectations, and specify materials by name from brands with real warranties. Built to the spec, not down to a price. Call (844) 320-6637 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Richardson.












