







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterHow Much Does Backsplash Installation Cost in Richardson?
Backsplash installation in Richardson typically costs between $800 and $2,500, with most full-wall tile projects landing in the middle of that band. A small, single-run splash behind a standard range sits near the low end, while a floor-to-ceiling installation with intricate tile and extensive outlet cutouts pushes toward the top. That range covers material and labor together; the written estimate you receive after we see the wall sets the final price.
The reason the spread is this wide is simple: a backsplash is mostly labor and detail work, not square footage. Two kitchens with the same wall area can price a thousand dollars apart depending on what tile you choose and how many obstructions the wall carries. Below, we break down what each piece of the job actually costs in Richardson and what moves it up or down.

Backsplash Installation Cost Breakdown (2026)
Here’s how a typical backsplash project breaks into line items. These are estimated ranges for the Richardson market, and your written estimate is the number that counts.
| Line item | Typical estimated range |
|---|---|
| Standard ceramic tile, single wall run | $800 – $1,300 |
| Porcelain or glass tile, full kitchen perimeter | $1,300 – $2,000 |
| Natural stone or mosaic, floor-to-ceiling | $1,800 – $2,500 |
| Substrate prep and old backsplash removal | $150 – $350 |
| Extra cutouts (outlets, switch plates, range hood) | $40 – $90 each |
| Grout, sealer, and finishing materials | $60 – $180 |
What usually pushes a project toward the upper end isn’t the square footage. It’s tile size and complexity. Large-format slabs go up fast but demand careful substrate prep and tight cuts around outlets. Small mosaic sheets look simple and aren’t: every sheet needs consistent spacing, and the grout lines multiply. A floor-to-ceiling run adds height, more cuts around upper cabinets, and more time on the wall. Glass tile adds another factor again, because it needs a setting material formulated for it and a careful hand to keep adhesive from showing through.
If your backsplash job is part of a larger kitchen update, the backsplash line item usually looks small next to the rest. Countertop installation in Richardson runs $2,000 to $6,500, and a full kitchen remodel sits between $14,000 and $45,000. A small kitchen remodel, by comparison, runs $9,000 to $20,000. Seeing the backsplash as one finished detail inside the bigger number helps you decide where to spend and where to save.
What Affects Backsplash Installation Pricing in Richardson
Five things drive the number more than anything else. Knowing them before you shop keeps the estimate conversation grounded.
- Tile material and size. Ceramic is the most economical choice and forgiving to cut. Porcelain, glass, and natural stone cost more per square foot and take longer to install. Bigger tiles mean fewer grout lines but heavier pieces and harder cuts at the edges and corners.
- Wall area and layout. A backsplash that runs behind the counters along one wall is a modest job. Wrapping the counter run around a corner, running up to the bottom of upper cabinets, or going floor-to-ceiling all add area and time. The wall behind a freestanding range adds a focal point that often needs a different treatment.
- Condition of the existing wall. In Richardson’s newer builds, drywall behind the counters is usually sound and ready for tile. In older homes, we sometimes find uneven drywall, old adhesive, or a backsplash that was grouted tight to the countertop. Removing and re-prepping adds time, and that shows up as a line item.
- Obstructions and cutouts. Every outlet, switch, and range hood interrupts the tile pattern. Each one takes measured cuts, and some take a specialty blade. The more electrical and venting on the wall, the more detail work.
- Grout and finish choices. Epoxy grout costs more than cement-based grout but resists staining better in a kitchen. Sealed natural stone needs periodic resealing, which is a maintenance cost to factor in. A simple grout line and a clean edge profile keep the finish work lean.
- Coordination with the rest of the kitchen. A backsplash installed during a full kitchen remodel is cheaper per job than one squeezed in after everything else is finished, because the wall is already open and the trades are already on site. That’s part of why we manage the whole project rather than handing it off piece by piece.
Richardson’s housing stock is a real factor here. The city grew fast through the 1970s and 1980s and kept building through the 2000s, so a single street can hold a 1978 ranch and a 2015 two-story. Tile setting in the older homes often means correcting drywall and pulling old adhesive; the newer homes usually need less prep but can have tighter cabinet clearances that change the tile layout. We adjust the scope to the house in front of us, not to a template.

How to Save on Backsplash Installation
There’s no way around the labor, but there are real ways to keep the total down without settling for a lesser result.
- Stay with a standard tile size. Mid-size ceramic or porcelain tile cuts cleanly, sets predictably, and keeps waste low. Very small mosaic and very large slab formats both add handling time that shows up on the estimate.
- Keep the layout simple. A straight set with a clean edge trim is faster to install than a diagonal pattern or an inset medallion. If you love a mosaic accent, use it on a small section rather than the whole wall.
- Bundle it with countertops. If new counters are coming anyway, install the backsplash at the same time. The wall is already accessible, the counter edge is fresh, and the whole job runs off one estimate with one accountable contractor. Specify by name, not by guesswork: Cambria, Silestone, and Caesarstone are the engineered stone lines we work with, and matching the splash to the counter in one pass saves a second mobilization.
- Buy your tile once, correctly. Order 10 to 15 percent extra for cuts and breakage. Running short mid-job and waiting for a second order costs more than the extra box.
- Get the estimate in writing first. A free estimate from us lays out the line items before work starts, so there are no surprises mid-project. Call (844) 320-6637 and we’ll schedule a look at the wall.
One more way to keep the budget honest: decide what the backsplash is for. If it’s protection and a clean finish, a durable porcelain does that job beautifully for less than a hand-set stone mosaic. If it’s the visual anchor of the kitchen, spend there and save on the cabinetry hardware. We match the material to the project, and we’ll tell you plainly which choices change the price and which don’t.
What Does Backsplash Installation Include?
A complete backsplash job covers six things, and every one of them should appear in the scope before you sign anything.
- Removal of the old backsplash, if there is one, and disposal of the debris.
- Wall prep, which may mean patching drywall, sanding rough spots, and priming the surface so the setting material bonds properly.
- Layout, meaning the plan for where tile starts and stops and how cuts land at corners and outlets.
- Setting the tile with the appropriate adhesive for the material, then cutting and fitting around outlets, switches, and the range hood.
- Grouting, cleaning, and caulking the seam where the splash meets the countertop and cabinets. That seam needs a flexible caulk, not rigid grout, because counters and walls move slightly and a rigid joint cracks.
- Sealing if the material requires it, which stone does and glazed ceramic does not.
Anything outside that list should be spelled out in the estimate. That includes running new electrical for under-cabinet lighting, reframing a wall, or repairing drywall damage that goes deeper than the surface.
Can We Install a Backsplash Over an Existing One?
Sometimes, but it’s usually the wrong path. Tile set over old tile raises the surface, which throws off the fit at the countertop edge and around outlets, and it hides whatever is happening behind the old layer. In most Richardson kitchens, the cleaner job is to remove the old splash, inspect the drywall, repair it, and start fresh. The prep line item is modest, and the finished result sits flush where it should.
Repair or Replace? What a Backsplash Decision Actually Costs
If a few tiles are cracked or loose, replacing just those tiles is a small job, often a few hundred dollars, and worth doing first. If the grout is failing across the whole wall or the layout no longer suits the kitchen, a full replacement lands in the standard $800 to $2,500 range. Patching tile that’s discontinued often ends up costing more in color mismatch than a clean replacement would. When the answer isn’t obvious, we’ll say so after looking at the wall.
Should You DIY or Hire a Pro for Backsplash Installation?
Tile setting isn’t the most dangerous work on a home, but it is unforgiving. A DIY backsplash can look fine on day one and fail within a year if the wall wasn’t flat, the adhesive was wrong for the tile, or the grout was mixed too stiff. Getting the layout right around outlets and the countertop seam is where most first attempts stumble. For homeowners who want the wall done once and done right, hiring a professional is the cheaper path over time. If you’re managing a kitchen project that spans countertops, cabinets, and the splash, working with a contractor who handles the whole scope keeps the sequence clean. That’s the reason we organize our work around Construction Richardson, where one contractor carries the project from first measurement to final walkthrough.
Backsplash Installation and the Rest of Your Kitchen
The backsplash almost never happens alone. If you’re already planning cabinet installation, those typically run $4,000 to $13,000, and kitchen island installation adds $3,000 to $10,000. Getting all of it planned together means one schedule, one set of measurements, and a backsplash that lands correctly against new counters and cabinets rather than being retrofitted around them. Kitchen remodeling handled as a single coordinated project is how the details stay consistent.
If your plans extend beyond the kitchen, we handle structural and cosmetic work across the house. That includes home additions and ADU projects, from custom site-built construction to prefab options from manufacturers like Abodu, Dvele, and Plant Prefab. Roofing runs on GAF, CertainTeed, and Owens Corning systems. Fencing comes in aluminum, vinyl, and ornamental lines, and driveways and pavers use Belgard, Techo-Bloc, Unilock, Tremron, and Cambridge Pavers. Structural or cosmetic, we handle both, and one contractor stays accountable through the whole build.
FAQs – Backsplash Installation Cost
How much does backsplash installation cost in Richardson in 2026?
Backsplash installation in Richardson typically costs $800 to $2,500, depending on tile, wall size, and prep work. A simple ceramic run behind the range usually lands at the low end; floor-to-ceiling porcelain or stone pushes to the top. Call (844) 320-6637 for an exact quote – estimates are free.
How much does a full kitchen tile backsplash cost compared to a small one?
A small single-wall splash behind the range typically runs around $800 to $1,300, while a full kitchen perimeter in porcelain or glass runs about $1,300 to $2,000. Floor-to-ceiling installations with natural stone or mosaic range from $1,800 to $2,500. Your written estimate sets the final price.
How long does backsplash installation take?
A standard wall-area backsplash is usually a one- or two-day job, and a floor-to-ceiling run or intricate mosaic can take longer because of setting and grout cure time. We’ll give you a realistic timeline with the estimate, so you can plan the kitchen’s return to normal use.
Do I need to remove the old backsplash before installing a new one?
In most cases, yes. Removing the old tile lets us inspect and repair the drywall, keeps the new surface flush at the countertop, and prevents a hidden layer from failing underneath. Old-splash removal adds roughly $150 to $350 to the job.
Can I get a free estimate for backsplash installation in Richardson?
Yes. We provide free estimates, and the written estimate spells out the scope, line items, and expected timeline before work starts. Call (844) 320-6637 to book a look at your wall. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Can you install a backsplash on walls that aren’t square?
Yes. Older Richardson homes often have walls that are slightly out of plumb, and the fix is in the layout and prep rather than in force-fitting tile. We plan the cuts and trim so the finished edge looks deliberate. Our technicians have up to 12 years of experience reading these walls before the first tile goes up.
Get Your Backsplash Estimate
The quickest way to turn these ranges into a real number is to have someone look at the wall. That’s a free estimate, with the line items written down so you know exactly what’s included. Our team works across Richardson on backsplashes, countertops, and cabinetry as a single coordinated scope. Built to the spec, not down to a price. Call (844) 320-6637. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. We’re closed Saturday, and a call outside dispatch hours is booked into the next opening. We’re licensed and insured, and the written estimate sets the final price.
Written by the team at Construction Richardson.
Pricing reflects the Richardson market as of 2026. Construction Richardson offers free estimates – call (844) 320-6637.
What Our Customers Say
"The framing was meticulous and the walls are straight everywhere. Drywall goes on a lot better when the framing is right."
- Neil Reddy"Ground up build. Permits, foundation, framing, all of it, and he ran the schedule tightly enough that the subs were never tripping over each other. Finished within a month of a fourteen month estimate."
- Claudia Herrera"Weekly site meeting, every week, with a written summary afterward. I always knew where the money and the schedule stood."
- Miguel Guzman












