
Driveway & Pavers Pricing Breakdown: What Richardson Homeowners Pay in 2026
Two bids land on the same Richardson driveway, and one says $12 per square foot while the other says $22. Same concrete pavers. Same house. The difference is almost always underneath the surface, in how much compacted base the contractor plans to install. Skip two inches of base and you’re looking at a repair bill inside three years. This breakdown walks through every line item in a 2026 Richardson paver driveway bid so you can read one properly.
If you’d rather have a contractor handle the numbers for you, call (844) 320-6637 to schedule a free estimate.
What drives paver driveway cost in Richardson in 2026?
Three pressures sit behind every Richardson paver quote this year: local labor rates, the real cost of proper clay base preparation, and lead times on imported stone. Texas labor rates for hardscape crews run higher than the national average because the work is more physically demanding. Base preparation costs more in Richardson because the clay soil under most driveways expands and contracts with moisture, so a driveway that lives over it needs deeper, better-compacted base than a national average would suggest. And imported travertine or premium stone can wait weeks for delivery, which pushes up scheduling and storage costs. Understanding those three factors is how you separate a fair bid from a low-ball one.
- Labor. Higher than national averages and unlikely to soften in 2026.
- Base prep. Texas clay demands more excavation and more compaction passes.
- Material lead time. Imported stone adds scheduling overhead a domestic concrete paver doesn’t.
What does each part of a paver driveway cost in Richardson?
Here’s how a 2026 Richardson paver driveway bid breaks down by line item. These are typical estimated ranges, and your written estimate sets the final price.
| Line item | Typical 2026 Richardson range |
|---|---|
| Excavation and haul-away of old surface | $2 – $4 per sq ft |
| Base material and compaction (proper depth) | $4 – $7 per sq ft |
| Bedding sand | $0.75 – $1.50 per sq ft |
| Paver material (varies widely by type) | $4 – $14 per sq ft |
| Labor and installation | $4 – $8 per sq ft |
| Edge restraints | $0.75 – $1.50 per linear ft |
| Polymeric joint sand | $0.50 – $1.00 per sq ft |
The base line is where a cheap bid hides its savings, and it’s the one line you should ask about in writing. A bid that quotes $12 per square foot and won’t show you its base depth spec is telling you something.
Price per square foot by paver type: entry, mid, and premium tiers

Material is the biggest swing factor in a Richardson paver driveway, and the type you choose sets the install price as much as the per-unit cost. Concrete pavers sit at the affordable end because they’re widely produced and easy to replace. Travertine looks stunning in Richardson’s warm months and costs accordingly. Permeable pavers solve drainage problems on tight lots. Reclaimed brick brings character with a price and a caveat about availability.
- Concrete pavers: entry $9 – $13 per sq ft installed; mid $13 – $18; premium $18 – $24 (larger formats, textured finishes).
- Travertine: entry $14 – $20 per sq ft installed; mid $20 – $28; premium $28 – $38 (thick-cut, tumbled edges).
- Permeable pavers: entry $12 – $18 per sq ft installed; mid $18 – $24; premium $24 – $30 (with engineered open-graded base).
- Reclaimed brick: entry $15 – $22 per sq ft installed; mid $22 – $30; premium $30 – $40 (rare sizes, hand-sorted).
We specify our hardscape from manufacturers like Belgard, Techo-Bloc, and Unilock so the material comes with a recognized factory warranty rather than a house-brand unknown when something needs replacing. That matters in a market where the paver itself is often the least replaceable part of the driveway.
Why Richardson base prep costs 15 – 20% more than the national average
Texas clay soil is the reason a Richardson paver driveway needs deeper base than a driveway built on sandy or loamy ground. Clay holds water, moves with the seasons, and heaves when it freezes if the base underneath is too thin to bridge those movements. A proper Richardson driveway base runs 6 to 8 inches of compacted crushed stone over native soil, in lifts compacted separately rather than dumped all at once. That’s one to two inches deeper than what most national cost guides assume, and that single line adds roughly 15 to 20% to the base-preparation portion of a bid.
How do you verify a bid reflects that? Ask for the base depth in writing, ask how many compaction passes the crew makes, and ask what spec the contractor uses for the upper two inches of the base. A contractor who can answer those questions on the spot has done the job before. One who says “we’ve been doing this for years, don’t worry about it” hasn’t given you a spec, and spec is what stands between your driveway and cracks in month 30. Our technicians have up to 12 years of experience and know Richardson’s soil profile well enough to price the base correctly the first time.
What hidden costs should you expect on a Richardson paver driveway?

Homeowners consistently miss five line items that don’t show up in a per-square-foot estimate but add real money to a paver driveway in Richardson. Get them out in the open before you sign.
- Permit fees. Most cities require a permit for structural driveway work, so ask your city’s building department what applies to your address and expect the permit cost to appear as its own line.
- Haul-away of existing concrete. Tearing out a poured concrete driveway and disposing of it isn’t cheap, and it’s a separate line from excavation.
- Tree root remediation. Mature trees close to the driveway mean cutting and treating roots, sometimes installing a root barrier, or in extreme cases rerouting the driveway around the tree.
- Drainage correction. If water pools toward the house now, sloping the new driveway correctly often means adding a channel drain or re-grading the surrounding yard.
- Utility relocation. Rare, but when a sprinkler line or low-voltage cable runs through the driveway footprint, someone has to move it before the base goes in.
None of those is a surprise when a bid lists them up front. All of them become resentments when they show up after the paver truck arrives.
How to read a paver bid like a contractor
You can spot a contractor cutting corners on a Richardson paver driveway bid by the way the base spec and joint sand are (or aren’t) spelled out. Base depth should be a number, not a vague “engineered base.” Compaction passes should be stated. The paver itself should be specified by brand and model, not “concrete pavers.” And the joint sand should be polymeric with the brand named.
- Base depth written as a number (6 – 8 inches for Richardson clay).
- Compaction method named, in lifts.
- Paver brand and product line spelled out, not generic.
- Edge restraints listed as a line item, not blended into labor.
- Polymeric joint sand listed by brand, not “joint sand.”
A bid that leaves out any of those is asking you to trust rather than verify. When you’re spending five figures on a driveway, verify. If you’d rather skip the bid-juggling and get one clear spec from a contractor who handles the whole job, our driveway & pavers team is the place to start.
When to call a pro on a paver driveway

Patio pavers set on a sand bed are borderline DIY for a handy homeowner with a strong back. Driveway pavers are not. The base volume, compaction equipment, edge restraint work, and sheer weight of the material make driveway installs a job that goes sideways fast in unskilled hands, and every one of those failures ends in a surface that shifts within a season. If your plan involves more than a small walkway, call a professional. Also call for repair work: if existing pavers are heaving, settling, or pooling water, the fix is almost always in the base, not the surface.
One more reason to line up a paver project with a broader property conversation: if you’re also replacing the fence line, the driveway pavers and fence installation often share a staging area, and coordinating them through one contractor saves you a scheduling battle. Same story if a paver walkway is part of a bigger plan like a home additions & ADU project, where the driveway has to be re-graded and rebuilt as part of the punch list. One contractor from permit to punch list is far easier to hold accountable than three specialty trades pointing at each other. Structural or cosmetic, we handle both, which is the whole reason we built a company that runs across seven categories instead of one.
The Bottom Line
Richardson paver driveway cost in 2026 comes down to three things: what’s underneath (base depth and compaction), what’s on top (paver type and brand), and what’s hiding in the fine print (permits, haul-away, drainage). A fair bid names all three. A cheap bid skips one. The written estimate always sets the final price, and a line-item bid is the only kind worth signing.
If you’re in Richardson and need help, Construction Richardson offers free estimates. Call (844) 320-6637. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. You can also start with the Construction Richardson team and see how a driveway fits into the rest of your property plan.
Frequently Asked Questions
A concrete paver driveway in Richardson typically runs $13 – $22 per square foot installed, with travertine and reclaimed brick reaching $24 – $38 per square foot depending on the tier. Call (844) 320-6637 for an exact quote – estimates are free.
Almost always because the base depth is thinner. A $12 per square foot bid and a $22 per square foot bid for the same concrete pavers are usually priced to different base specs. Ask both contractors for base depth in writing and compare. Call (844) 320-6637 for an estimate with the base spec spelled out.
It shouldn’t if the bid was thorough. The written estimate sets the final price, and hidden line items like utility relocation or tree root removal should be planned for before the contract is signed. Call (844) 320-6637 to schedule an estimate.
A typical residential driveway runs one to two weeks from tear-out to final joint sand, with the base and compaction phase taking the longest share of that window. Imported stone can add lead time to the front end. Call (844) 320-6637 to talk through your project timeline.
Written by the team at Construction Richardson.
Need Construction Help?
Call Construction Richardson - licensed & insured, here with fast help in Richardson.
(844) 320-6637