







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Richardson Homeowners Choose Toto Construction
Construction Richardson provides independent Toto service and installation across Richardson: toilet repair, Washlet and Neorest diagnosis, and full bathroom remodels built around Toto fixtures. What sets our Toto work apart is that we treat these fixtures as specific products, not generic plumbing. We know the valve cartridges, flush towers, wand nozzles and seat hinges these toilets and washlets actually use, and we know why they fail.
Richardson is our kind of town for this work. It’s a mature inner-ring Dallas suburb, mostly built out between the 1950s and 1970s, where almost every job is a remodel or an addition rather than a new build. The housing around the original 1950s core near Downtown Richardson and up through the Telecom Corridor is exactly where older bathrooms sit on aging supply lines, uneven slabs and tired flanges. Bringing that mid-century stock up to current code is the daily work here, and the city’s building department enforces it.
One thing to be clear about up front: we are an independent Toto service provider. We are not affiliated with, authorized by or sponsored by Toto, and we don’t claim to be. We repair and install Toto equipment because we do it well, not because the manufacturer sent us. We also service and install the other plumbing and construction brands Richardson owners ask for, and we handle structural and cosmetic work under one contractor.
Our technicians have up to 12 years of experience with these fixtures. Call (844) 320-6637 to schedule a free estimate.
Why Trust Construction Richardson for Your Toto Construction?

Because Toto toilets and washlets are engineered products with parts that fit only them. A fill valve that works fine in a builder-grade tank can be the wrong shape, the wrong height or the wrong flow rate for a Drake or an Ultramax, and a seat hinge bought off a shelf rarely lines up with the mounting posts on a one-piece bowl. Our technicians work on Toto fixtures regularly enough to know the difference before they open a box.
We lean on genuine Toto OEM fill valves, flush towers, gaskets and Washlet components where fit matters. For supply lines, angle stops and fittings, we use quality parts that meet or beat the original spec. That split is deliberate. The parts that touch the ceramic and the electronics should be the ones the fixture was built around; the parts that carry water to it just need to be good.
Warranty-safe service means working the way the fixture was designed to be worked on. That means the correct flange seal, the correct tank-to-bowl gasket, and no forcing a component that was never meant to be forced. It also means telling you when a repair will cost more than it’s worth. We don’t have a manufacturer call center to route you toward, so the recommendation you get is the one that makes sense for your bathroom.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Toto Construction Problems We Fix in Richardson
Toto fixtures are reliable, which is why people keep them through remodel after remodel. But they do show predictable problems, and knowing which one you’re looking at saves time and money.
- Washlet and Neorest electronic failures. A dead seat heater, a remote that stops responding, or a wand that won’t extend usually points to the control board, a failed heating element or a connection that’s given up. These are the hardest Toto failures to diagnose because the symptom and the cause often sit in different parts of the unit. A careful diagnosis before you replace anything is the difference between a repair and an unnecessary new fixture.
- Clogged or mineral-scaled wand nozzles. North Texas water is hard, and the fine nozzles on a Washlet are where that hardness shows first. Spray patterns go crooked, pressure drops, or one nozzle stops entirely. In most cases the nozzle assembly can be descaled or serviced rather than replaced, but left alone long enough the scale moves into the internal passages and the fix gets bigger.
- Fill and flush valve wear on Drake and Ultramax tanks. A toilet that refills on its own hours after a flush, a weak flush, or a hiss that never quite stops all trace back to the same place: a worn fill valve or a flush tower gasket that no longer seals. This is the most common Toto service call we see, and it’s usually a straightforward parts replacement once the right valve is matched to the tank.
- Gasket and wax-ring leaks at the closet flange. One-piece fixtures like the Ultramax are heavy, and when one gets reset on an uneven slab without a proper seal, water finds the gap. Richardson’s expansive black-clay soil swells and shrinks with the wet-dry cycle, so slabs in older neighborhoods move seasonally. A flange that was fine a few years ago can rock just enough to break the seal. We check the flange and the floor before we set anything back down.
- Supply-line and angle-stop leaks plus corroded tank bolts. On older Drake installs these often turn up during a bathroom remodel teardown, when the vanity comes out and the shutoff valve is finally visible. Corroded tank bolts are the same story – they hold until they don’t, and a bolt that snaps during a repair can crack a tank if it’s handled wrong.
Here’s the pattern worth knowing. A toilet that refills on its own hours after a flush, or a Washlet seat that no longer heats or sprays, is almost always one of two things: a worn fill valve or flush tower gasket on a Drake or Ultramax, or a scaled wand nozzle and tired control board on a Washlet. A qualified local pro pulls the tank, replaces the valve and gaskets with the correct Toto parts, descales or services the Washlet, checks the flange and supply line for leaks, and confirms the fixture sits level before resealing. That’s the whole job, done in the right order.
Toto Parts & Our Repair-vs-Replace Approach

Parts decisions on Toto equipment come down to fit. Where the fit matters – fill valves, flush towers, tank-to-bowl gaskets, Washlet components – we use genuine Toto OEM parts. Where an aftermarket part is equal or better, like a braided supply line or a quality angle stop, we use that and tell you why. We don’t stock Toto parts or claim to be a parts dealer; we source what the fixture needs.
Repair versus replace is a real question on Toto equipment, and it deserves a straight answer. A fill valve is a repair, always. A Washlet control board is a judgment call: we compare the cost of the part and labor against a replacement unit and tell you plainly which way the math goes. On a Neorest, where the electronics are integrated into the fixture, that conversation matters more, because chasing parts on a control system that’s failing in more than one place rarely ends well.
What you won’t get from us is a push toward replacement because it’s easier to quote. If a repair makes sense, we’ll say so. If it doesn’t, we’ll say that too. Call (844) 320-6637 for a free estimate on your Toto repair or bathroom project.
Our Toto Service Process – Step by Step
- 1
Diagnosis. We start by confirming what’s actually failing rather than what it looks like. On a tank problem that means checking the fill valve, flush tower and gasket separately. On a Washlet it means testing the heater, the remote signal and the nozzle flow before anyone talks about a control board.
- 2
Repair or install. Once we know the cause, we replace the failed part with the correct Toto component, or install the new fixture if that’s the right call. On a remodel, this is also when we check the flange, the supply line and the subfloor while everything is open, since a leak under a new floor is a far worse problem than a leak under an old one.
- 3
Test. A Toto toilet gets flushed repeatedly and watched for phantom refill. A Washlet gets cycled through every function, with the heater and nozzle spray verified. We check for leaks at the supply, the tank and the base, and we confirm the fixture sits level.
- 4
Warranty and paperwork. You get a written record of what was replaced and what brand of part went in. That matters if a Toto warranty question ever comes up later, and it matters if you sell the house.
See the difference
Before
After
Before
After
Before
AfterToto Products We Service & Install in Richardson

We service and install the Toto toilet lines Richardson owners actually have in their bathrooms: the Drake two-piece line, including Drake II; the Eco Ultramax and Ultramax II one-piece toilets; the Washlet and Washlet+ bidet seats and integrated toilets; and the Neorest integrated smart toilet.
That covers everything from a straightforward fill valve replacement on an older Drake to a full electronic diagnosis on a Neorest, plus installing a new Toto fixture as part of a bathroom remodel. If you’re planning a bathroom project in Richardson and want Toto fixtures specified from the start rather than retrofitted later, we handle that too, from layout through final connection.
We Also Service These Brands
Toto is one part of a much larger plumbing and construction picture. We work across Kohler, Grohe, Moen, Delta, American Standard and Blanco on the fixture and fitting side, and our remodeling work draws on cabinet lines from KraftMaid and Wellborn, roofing systems from GAF, and windows and doors from PGT where the project calls for them. One contractor, one point of accountability, whatever the brand.
FAQs – Toto Construction Service in Richardson
No. Construction Richardson is an independent Toto service provider and is not affiliated with, authorized by or sponsored by Toto. We repair and install Toto equipment with quality parts that fit it, and we say plainly that we’re independent so you know exactly who’s working on your fixture.
Yes. We use genuine Toto OEM parts where fit matters – fill valves, flush towers, gaskets and Washlet components – and quality aftermarket parts for supply lines and fittings where they meet or beat the original. We don’t claim to stock Toto parts; we source the right ones for your fixture.
Most Toto repairs, like a fill valve or flush tower replacement, are finished in a single visit. Washlet and Neorest electronic diagnosis can take longer depending on which components need testing. Call (844) 320-6637 for a free estimate and we’ll give you a realistic timeline for your fixture.
We service and install the Drake and Drake II two-piece toilets, the Eco Ultramax and Ultramax II one-piece toilets, the Washlet and Washlet+ bidet seats and integrated toilets, and the Neorest integrated smart toilet. That covers tank repairs, electronic service, nozzle descaling and full fixture installation.
Working with an independent provider doesn’t automatically void a Toto warranty, but the details depend on your specific warranty terms, so read them or ask Toto directly. We use genuine Toto parts where fit matters and keep a written record of what was replaced, which protects you if a warranty question comes up later.
Toto repair costs depend on the part and the fixture, while bathroom projects in Richardson typically fall in these estimated ranges. The written estimate sets the final price.
| Project | Typical Estimated Range |
|---|---|
| Bathroom Remodel | $9,000 – $28,000 |
| Small Bathroom Remodel | $5,000 – $12,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
| Tub-to-Shower Conversion | $3,500 – $10,000 |
| Bathroom Vanity Installation | $800 – $3,000 |
Call (844) 320-6637 for an exact quote. Estimates are free.
Often, yes, but the cause matters. A dead heater with an unresponsive remote can mean a failed control board, a disconnected internal harness or a power supply issue, and testing each one tells us whether it’s a repair or a replacement. Call (844) 320-6637 for a free estimate and a straight answer on which way it goes.
A worn fill valve or a flush tower gasket that no longer seals is almost always the cause. The valve keeps topping off the tank because water is escaping past the seal. It’s one of the most common Toto service calls in Richardson and usually a straightforward parts replacement once the right valve is matched to the tank. Call (844) 320-6637 for a free estimate.
It can often be serviced and reinstalled, provided the electronics are healthy and the rough-in is verified before the new floor and walls go in. We test the unit before demolition begins so you’re not discovering a failing control board after the tile is set. Call (844) 320-6637 to schedule a free estimate before your remodel starts.
Yes. North Texas water is hard, and the fine wand nozzles are where scale shows up first, which is why spray patterns go crooked or pressure drops over time. Regular descaling prevents most of it, and servicing a scaled nozzle assembly is far cheaper than replacing the unit. Call (844) 320-6637 for a free estimate.
Usually, but it has to be measured. Rough-in distance, flange condition and floor level all matter, and on Richardson’s expansive clay soils a slab that’s moved seasonally can leave a flange out of level. We verify all three before recommending a fixture. Call (844) 320-6637 for a free estimate.
Book Your Toto Service in Richardson, TX
Whether it’s a Drake that won’t stop running, a Washlet that’s lost its heat, or a full bathroom remodel built around Toto fixtures, we’re ready to take a look. One contractor handles the diagnosis, the repair and the finish work, with licensed and insured service and a written estimate before anything starts. Call (844) 320-6637. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Richardson.












