







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Richardson Homeowners Choose Belgard Construction
Construction Richardson provides independent Belgard construction service in Richardson, TX: paver patios, paver driveways, driveway replacement, retaining walls and the base work underneath all of it. We install, repair and re-level Belgard hardscape systems that were built badly the first time, and we’re upfront that we’re an independent installer, not a Belgard dealer or an authorized Belgard contractor. What sets our Belgard work apart in Richardson is that we treat base preparation, drainage and edge restraint as the actual job, not an afterthought before the pretty part.
Belgard is one of the hardscape systems we work with most, alongside Techo-Bloc, Unilock, Tremron and Cambridge Pavers. If your patio is rocking, your wall is bulging, or salt is blooming through the face of your stone, call (844) 320-6637. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Key Takeaways
- We service and install Belgard paver patios, driveways and retaining wall systems in Richardson as an independent installer.
- Most Belgard failures we see in Richardson are base and drainage problems, not paver problems.
- We can match a discontinued or faded Belgard run by profile and color where a catalog-only dealer can’t.
- Estimates are free and the written estimate sets the final price.
Why Trust Construction Richardson for Your Belgard Construction?

Our technicians have up to 12 years of experience with hardscape systems, and that time shows up in the unglamorous parts of a Belgard install: excavating deep enough, compacting in lifts, checking slope with a level instead of an eye, and spiking edge restraint into compacted base instead of dirt. We match the original Belgard profile, color and thickness so new units blend with what’s already there. Where a run is discontinued or badly faded, a quality compatible paver plus a fresh edge course reads far better than a visible patch in the middle of the field.
Warranty-safe service is part of the pitch. Belgard’s coverage depends on proper installation – correct base depth, correct compaction, correct edge restraint and the joint sand the system calls for. Cutting corners on any of those quietly forfeits the warranty you paid for. We install to spec so the warranty stays intact, and we tell you plainly when a repair will protect it and when a shortcut won’t.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Belgard Construction Problems We Fix in Richardson
Richardson’s black-clay soil swells and shrinks with the wet-dry cycle, and Belgard failures here follow a pattern. Here’s what each profile actually does:
- Lafitt Rustic Slab fields shifting and rocking. Lafitt pavers rock at corners and shed joint sand after rain because the base was compacted in one lift and never re-leveled. Joint sand washes out, edges spall under foot traffic, and low spots near downspouts pull water under the field.
- Catalina Grana and Catalina Slate showing white, chalky bloom. Efflorescence and salt bloom on Catalina faces comes from moisture trapped under a poorly draining base or a missing underdrain behind wall courses. It’s a water problem showing up on the surface, not a defective paver.
- Edge restraint failure on driveways and patio borders. Pavers spread and joints open at the perimeter where the lip wasn’t spiked into compacted base. Once the edge lets go, the whole field unzips outward.
- Mega-Lafitt and Aberdeen wall caps loosening, faces bulging. Taller terraces bulge when geogrid and gravel backfill are inadequate. The clay pushes, the wall leans, and the caps start rocking.
- Urbana Stone and Weston Stone bloom and settlement. Urbana and Weston wall systems show salt bloom and settle where drainage behind the wall was never addressed, so water sits against the block instead of draining away.
One picture this paints: a Belgard Lafitt patio a few years old starts to rock at the corners and shed joint sand after every rain, and the homeowner notices the pavers near the downspout sitting lower than the rest. The usual cause is a thin, single-lift base with no compaction control and no positive slope away from the house, so water ponds and the bedding layer migrates. A qualified local installer pulls the affected field, excavates to a proper compacted gravel depth, re-screens and re-slopes the bedding, resets the Belgard units with a spiked edge restraint, and re-sands with polymeric joint sand.
Belgard Parts & Our Repair-vs-Replace Approach

We don’t stock OEM or genuine Belgard parts, and we don’t claim to. What we do is source quality parts that fit Belgard systems: compatible pavers, edge restraint, geogrid and polymeric joint sand matched to your existing field. Where possible we match the original profile, color and thickness so the repair disappears into the patio. Where a run is discontinued or too faded to blend, we recommend a fresh edge course instead of a visible patch.
Our repair-vs-replace call is honest and simple. Lift-and-relay with a corrected base fixes most Belgard failures, and that’s the first thing we quote. Full replacement is only warranted when the base and drainage are fundamentally wrong – too shallow, no slope, no underdrain – and patching would just kick the same problem down the road. Call (844) 320-6637 and we’ll tell you which one you’re looking at. Estimates are free.
Our Belgard Service Process – Step by Step
- 1
Diagnosis. We walk the field, check slope with a level, tap pavers to find hollow spots, probe the base depth, and inspect edge restraint and wall backfill. We identify which Belgard profile is in place and what’s actually failing.
- 2
Plan and repair or install. We match profile and color, then lift-and-relay with corrected base or install new Belgard units to proper compacted depth with spiked edge restraint.
- 3
Drainage and wall detailing. We re-slope away from the house, add underdrain behind wall courses where needed, and set geogrid and gravel backfill on taller Mega-Lafitt and Aberdeen terraces.
- 4
Re-sand and test. We re-sand with polymeric joint sand, water it in, and check that water runs off instead of ponding.
- 5
Warranty. We hand over documentation of base depth and materials so your Belgard coverage stays clean.
See the difference
Before
After
Before
After
Before
AfterBelgard Products We Service & Install in Richardson
We service and install Belgard paver systems for patios, driveways and walkways, plus Belgard retaining wall systems. That covers Lafitt Rustic Slab and Catalina Grana/Catalina Slate paver fields, and Mega-Lafitt, Aberdeen, Urbana Stone and Weston Stone walls and terraces. Most of our Belgard work in Richardson is a paver patio installation, a paver driveway installation, a driveway replacement, or a lift-and-relay on a field that was built over a bad base. We don’t sell Belgard product by the pallet or act as a dealer – we put systems in correctly and fix the ones that weren’t.
We Also Service These Brands
Belgard is one hardscape line among several we work with. We also install and service Techo-Bloc, Unilock, Tremron and Cambridge Pavers, and our broader work runs from KraftMaid cabinets and Kohler fixtures to GAF roofing and PGT windows. One contractor for structural and cosmetic work, specified by name.
FAQs – Belgard Construction Service in Richardson

No. We are an independent Belgard service provider, not a Belgard dealer or an authorized Belgard contractor, and we don’t claim factory training or certification from Belgard. We install and repair Belgard systems to spec because we know the products. Call (844) 320-6637 for a free estimate.
Yes. We use compatible pavers, edge restraint, geogrid and polymeric joint sand matched to your Belgard system – quality parts that fit, not OEM or genuine Belgard parts. Call (844) 320-6637 and we’ll walk through what your repair needs.
A lift-and-relay on a paver field usually takes a few days depending on square footage and base conditions, and a full paver installation or driveway replacement takes longer once excavation and compaction are accounted for. The written estimate sets the timeline. Call (844) 320-6637 for a free estimate.
We cover Belgard paver systems for patios, driveways and walkways, plus Belgard retaining wall systems including Lafitt, Catalina, Mega-Lafitt, Aberdeen, Urbana Stone and Weston Stone. Call (844) 320-6637 to confirm your profile.
Proper installation protects your Belgard warranty, not voids it. Belgard coverage depends on correct base depth, compaction, edge restraint and joint sand, so a warranty-safe install means doing those right. Call (844) 320-6637 for a free estimate.
Typical estimated ranges in Richardson: paver patio installation $3,500 – $11,000, paver driveway installation $7,000 – $18,000, driveway replacement $5,000 – $14,000, and driveway sealing $250 – $700. These are estimates – the written estimate sets the final price. Call (844) 320-6637 for an exact quote, free of charge.
Usually. We match the original profile, color and thickness where possible so new Lafitt units blend into the existing field. Where a run is discontinued or too faded to blend, a quality compatible paver plus a fresh edge course reads better than a visible patch. Call (844) 320-6637 for a free estimate.
That white chalky bloom on Catalina Grana and Catalina Slate is efflorescence – salt migrating to the surface from moisture trapped under a poorly draining base or a missing underdrain. It’s a water problem showing up on the face, not a defective paver. Call (844) 320-6637 and we’ll diagnose the drainage.
Most bulging Mega-Lafitt and Aberdeen walls can be repaired by removing the affected courses, correcting geogrid and gravel backfill, and resetting the blocks. A wall only comes down when the base and drainage are fundamentally wrong. Call (844) 320-6637 for a free estimate.
A Belgard driveway needs a deeper, more heavily compacted base than a patio because it carries vehicle loads, and Richardson’s expansive black clay makes compaction control matter more than in milder soils. The written estimate specifies the base depth for your job. Call (844) 320-6637 for a free estimate.
We use polymeric joint sand and edge restraint matched to your Belgard system – quality parts that fit, not necessarily Belgard-branded. What matters is correct compaction and spiking the edge restraint into compacted base. Call (844) 320-6637 to talk through your patio or wall.
Book Your Belgard Service in Richardson, TX
If your Belgard patio is rocking, your wall is bulging, or your driveway edges are spreading, we can diagnose it and tell you honestly whether it’s a lift-and-relay or a full replacement. Call (844) 320-6637 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Richardson.












