







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Why Richardson Homeowners Choose PGT Construction
We provide independent PGT construction service in Richardson, and what makes our PGT work different is that our guidance comes from what this city’s housing stock and weather actually do to PGT products, not from a manufacturer script. We repair, install and service PGT windows and doors as a trade resource, not a factory channel, and we’ll tell you plainly whether a failed unit can be re-glazed or needs replacing before anyone writes a quote. Richardson is largely built out, a mature 1950s-70s inner-ring Dallas suburb where most work is remodel, addition and tear-down-rebuild rather than greenfield new build.
That matters for PGT owners. Much of the PGT product in Richardson sits in homes near the original 1950s core by Downtown Richardson and around the Telecom Corridor, where original ranch stock has been renovated in stages, and each stage left its own windows and doors behind. We’re not affiliated with or authorized by PGT. We’re an independent PGT service provider, and we work alongside our roofing, remodeling and additions services. Call (844) 320-6637 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Trust Construction Richardson for Your PGT Construction?

Our technicians have up to 12 years of experience, and that familiarity shows in small things on PGT work: knowing that a WinGuard laminated sash has to be matched as a glazed assembly rather than patched, that a dragging aluminum sliding door is usually rollers and a galled track instead of a frame problem, and that vinyl sash welds and weatherstripping age differently in North Texas heat than they do in milder regions. We use quality parts that fit PGT equipment. Where a piece like a roller, latch or weatherstrip has been discontinued by the factory, we source a quality aftermarket equivalent that does the same job rather than leaving the door inoperable.
Warranty-safe practice is part of the approach. We document the condition of the unit before we touch it, photograph the glazing seals and frame corners, and keep our work to repairing or replacing what the existing frame can carry without overloading it. Because we handle roofing and remodeling in the same company, we can also check the opening above a window or door when a seal failure seems to track with a roof repair that disturbed flashing or with a storm that drove water sideways into a wall.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common PGT Construction Problems We Fix in Richardson
The failures we see on PGT products in Richardson trace to the same two forces the city throws at every house: heat expansion and hail. Here’s what those look like up close.
- Glazing seal failure on WinGuard laminated impact units. A milky edge, a hazy band creeping inward from the frame, or moisture trapped between the laminated glass and the outer pane. The seal on the laminated assembly has broken down, and no amount of cleaning will bring the glass back. It’s the failure homeowners notice first because it spreads.
- Roller and track wear on PGT aluminum sliding glass doors. The panel drops slightly, drags across the sill, and the latch stops lining up after years of thermal cycling. Aluminum frames move with North Texas heat, and the rollers wear flat, so the panel sits lower than it should. It’s a hardware-and-track repair in most cases, not a door replacement.
- Weatherstripping and wool-pile seal degradation on vinyl single-hung and casement sashes. Whistling at the seams on a windy day and condensation collecting on the interior frame are the usual signals. The wool-pile seal flattens and pulls away from the sash, and the window loses its air barrier without ever cracking.
- Frame corner separation and cracked welds on older vinyl PGT frames. Repeated heat expansion, plus the black-clay soils across Richardson that swell and shrink with the wet-dry cycle, can rack an opening enough that welded corner joints separate. Hairline cracks at the corner are the start of a bigger problem.
- Loss of protective film and laminate clarity on impact-glass units. Impact units carry a protective film on the laminated glass, and when it degrades or peels, the glass loses both clarity and, over time, some of the laminate’s structural integrity. This one is tied directly to sun exposure and hail impacts, which North Texas delivers in volume.
PGT Parts & Our Repair-vs-Replace Approach

For PGT impact units, the glazed sash or insulated glass unit is typically replaced with OEM-matched glass rather than patched, because the laminated assembly is what carries the impact rating. Patching a laminated unit would leave the rating behind. Hardware like rollers, latches and weatherstrip can come from quality aftermarket suppliers when the original parts are no longer made. We don’t stock or carry OEM parts, so we source what fits the unit properly.
Our honest stance: a failed seal on one WinGuard sash is a targeted glass replacement. Corner separation showing up across several frames usually points to whole-unit replacement. We’ll tell you which one you’re looking at and why. Call (844) 320-6637 for a free estimate.
Our PGT Service Process – Step by Step
- 1
Diagnosis. We inspect the unit in person and check the glazing seals, frame corners, rollers, track and weatherstrip against what a PGT product of that kind should show. We photograph everything, because a hazy WinGuard edge and a corner weld crack are both easy to misread from a distance.
- 2
Repair or install. If glass alone needs replacing, we match the laminated unit to the frame so the impact rating stays intact. If hardware needs replacing, we fit quality parts to the existing track. If the frame has moved, we reset or replace the whole unit.
- 3
Test. We operate every sash and panel, check that latches line up, look for air gaps at the seams and confirm the glass is seated cleanly in the frame. Sliding doors get a full open-and-close cycle with the latch checked each time.
- 4
Warranty. We document what was repaired and with what parts, which protects your PGT warranty position and gives you a record if the same unit needs attention later.
See the difference
Before
After
Before
After
Before
AfterPGT Products We Service & Install in Richardson
We service and install the kinds of PGT windows and doors common in Richardson homes: WinGuard Aluminum Impact-Resistant windows, WinGuard Vinyl impact windows, Architectural Series vinyl single-hung and casement windows, and PGT aluminum sliding glass doors. Impact-rated glazing carries a specific assembly, and we handle glass replacement on those units as carefully as we handle full replacement. Our window and door work includes impact window installation and standard window replacement across Richardson. We don’t claim to stock any PGT product or part; we source what the job needs.
We Also Service These Brands
We’re multi-brand by design, not single-brand dependent. Alongside PGT, we work with KraftMaid cabinetry, Kohler fixtures, GAF roofing systems and Master Halco fencing. That breadth matters in Richardson, where a remodel often runs into windows and doors, a roof repair and a fencing replacement in the same stretch of work. One contractor from permit to punch list.
FAQs – PGT Construction Service in Richardson

No. We are an independent PGT service provider, not a PGT dealer and not factory-authorized. We repair, install and service PGT windows and doors with quality parts that fit the equipment, and we work from what North Texas weather and Richardson’s housing stock do to PGT products rather than from a manufacturer script. Call (844) 320-6637 for a free estimate.
Yes. We use quality parts that fit PGT equipment, and where a factory part like a roller or weatherstrip has been discontinued, we source a quality aftermarket equivalent. For PGT impact units, the glazed sash or insulated glass unit is replaced with OEM-matched glass rather than patched, because the laminated assembly is what carries the impact rating. Call (844) 320-6637 to talk through your unit.
Hardware and weatherstrip repairs on a PGT aluminum sliding door or a vinyl sash usually finish in a single visit. A glazed glass replacement on a WinGuard unit takes longer because the laminated assembly has to be matched and ordered. We confirm timing in the written estimate before work starts, and that estimate sets the final price. Call (844) 320-6637 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
We cover PGT WinGuard Aluminum Impact-Resistant windows, WinGuard Vinyl impact windows, Architectural Series vinyl single-hung and casement, and PGT aluminum sliding glass doors. We handle impact window installation and window replacement across Richardson, and we check whether the opening above a unit was disturbed by a storm or a roof repair when a seal failure tracks with it. Call (844) 320-6637.
Repairing or replacing what the existing frame can carry, and documenting the work and the parts used, keeps your warranty position intact. We photograph the unit before work and record what was changed. We’re an independent provider, so we can’t speak on PGT’s behalf about a specific claim, but we give you the record you’d need. Call (844) 320-6637 for a free estimate.
Typical estimated ranges for the work we do around PGT units in Richardson are below. These are typical ranges only, and the written estimate sets the final price.
| Service | Typical Estimated Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Roof Repair | $400 – $1,800 |
Call (844) 320-6637 for an exact quote. Estimates are free.
That band is almost always a failed glazing seal on the laminated impact unit, and no cleaning will fix it. The glass is replaced with an OEM-matched laminated unit that keeps the impact rating intact; the frame itself is usually sound. Call (844) 320-6637 for a free estimate.
It’s a repair in most cases. Worn rollers and a galled track lower the panel and throw the latch out of alignment after years of thermal cycling. We replace the rollers and hardware with quality parts that fit the door. Call (844) 320-6637 for a free estimate.
Not when the laminated glazed sash or insulated glass unit is replaced with OEM-matched glass rather than patched. The laminated assembly is what carries the rating. Patching a laminated unit is what breaks it. Call (844) 320-6637 and we’ll confirm what your unit needs.
Often they can be repaired. Hail damage to a vinyl sash is usually cracked welds at the corners or a damaged screen and seal, which we can replace. When corner separation shows up across several frames, that points to whole-unit replacement. Call (844) 320-6637 for a free estimate.
The frame construction and the way the unit sits in the opening tell the story. Original installs in Richardson’s 1950s-70s ranch homes look different from later retrofits, and older stock around the 1950s core near Downtown Richardson often has a mix. We can tell you which you have during a free estimate. Call (844) 320-6637.
Book Your PGT Service in Richardson, TX
If your PGT windows or doors need attention, call us for a free estimate. We’ll confirm whether a failed WinGuard seal is a targeted glass replacement or a whole-unit job, and we’ll back it with quality parts that fit. Call (844) 320-6637. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Richardson.












