







Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Trusted Windows & Doors for Richardson Homeowners
Windows and doors are where a Richardson home leaks money. A single-pane window on a west-facing wall can push afternoon heat straight into a living room, and an aging patio door lets conditioned air slip out all summer. Our technicians have up to 12 years of experience installing and replacing both, and we connect you with independent local professionals who measure, source, permit and install under one accountable scope. Impact-rated and energy-efficient lines from ViewLux, PGT, CGI and CWS are all on the table when the project calls for them. Call (844) 320-6637 to schedule a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
What Our Windows & Doors Service Includes

We handle the whole envelope of the opening: the unit, the frame, the flashing, the trim and the finish. That means one conversation covers the glass specification, the manufacturer, the measurement tolerance and the sequence with anything else happening on your house. Here’s what each part of the work looks like.
Window Installation
Window installation sets a new unit into a prepared opening, whether that’s a full-frame tear-out on new construction or a new opening cut into an existing wall. You need it when a room is being added, a wall is being reconfigured, or a previous window was framed poorly enough that replacement alone won’t fix it. We confirm rough-opening dimensions before the unit is ordered, check that the sill and head are square, and coordinate flashing and exterior trim so water moves away from the wall, not into it.
Door Installation
Door installation covers entry doors, interior doors and the frames that hold them. It’s the right call when an entry is undersized, a frame has swelled or settled out of plumb, or you’re upgrading to a premium system like Therma-Tru for a front door that needs to look right from the street. We check the opening for square and level, set the threshold so it drains correctly, and hang the slab so the reveal stays even through the seasons.
Window Replacement
Window replacement swaps existing units for new ones inside the same opening, usually without disturbing interior trim. Most Richardson homeowners reach this point when glass has fogged between panes, frames have warped past the point of adjustment, or the original builder-grade units have simply run their course. We measure every opening individually because no two are identical after settling, then set the units, seal the perimeter and check operation on every sash before we leave.
Impact Windows & Doors
Impact windows and doors use laminated glass and reinforced frames to resist wind-borne debris and forced entry. They’re specified when a home needs storm protection, when noise from a nearby arterial is a real problem, or when a homeowner wants a security upgrade without adding bars or shutters. We work with impact-rated manufacturers including PGT and CGI, and we match the rating of the glass to what your opening actually requires rather than applying one spec across the whole house.
Energy-Efficient Windows
Energy-efficient windows combine low-emissivity coatings, insulated glass units and thermally broken frames to reduce heat gain and loss. They matter most on the elevations that take direct afternoon sun, where a low-performance unit turns a room into an oven by mid-afternoon. We look at orientation, shading and the existing HVAC load before recommending a glass package, because the right spec for a shaded north wall is not the right spec for a west wall in a Texas summer.
Sliding & Patio Doors
Sliding and patio doors are the large-format openings that connect a house to a patio, deck or yard. They need replacing when the track has worn, rollers drag, the glass has lost its seal, or the door no longer locks securely. We spec the panel configuration to the traffic pattern in the room, confirm the sill drains away from the house, and check the lock and roller hardware on site so the door operates with one hand.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Brands We Service for Windows & Doors
We work with window and door manufacturers whose products hold up under real specification. PGT builds impact-rated systems that are widely used across the region, and we know where their frames and hardware need attention over time, especially around the sill and the operating hardware on sliding units. CGI is another impact-focused line we handle regularly, and we understand how their glazing packages behave when the opening faces the harshest sun on the property.
ViewLux is a strong option when a homeowner wants a clean, modern profile without the full impact specification, and we know which of their units suit a shaded elevation versus a sun-baked one. CWS covers a range of performance-tested window and door systems, and we’ve learned which configurations install cleanly in the openings common to Richardson housing stock. Like any manufacturer, these products wear at the seals, rollers and weatherstripping first, and that’s usually where we start when something stops working. Whether you have PGT, CGI, ViewLux, CWS or any other make, we can help.
Signs You Need Windows & Doors Right Now
Most window and door problems announce themselves long before the unit fails outright. Here are the signals worth acting on.
- Fogging or condensation between panes. That moisture means the sealed glass unit has lost its seal and the insulating gas is gone. The window still blocks wind, but it no longer performs, and the haze only gets worse over time.
- Drafts near the frame or threshold. A draft you can feel with your hand usually means worn weatherstripping, a failed seal or a frame that has pulled away from the wall. It’s a comfort problem now and a moisture problem later.
- Sticking, dragging or hard-to-lock sashes and doors. Operation that gets harder each season points to a frame out of square or worn hardware. A door that won’t latch fully is also a security weakness worth addressing.
- Visible rot, soft wood or peeling paint at the sill. Water is getting in and not getting out. Sill damage spreads into the framing if it’s left alone, so it’s worth having it looked at before the repair grows.
- Rooms that won’t hold temperature. If one room runs hot in summer and cold in winter while the rest of the house stays comfortable, the glass and frame on that elevation are the likely cause.
Our Windows & Doors Process – Step by Step
- 1
On-site measurement and assessment. We measure every opening, check the frames for square and level, and note the condition of the surrounding wall, sill and trim. This is where we catch the surprises that would otherwise surface mid-install.
- 2
Specification and written estimate. We recommend a unit and glass package based on orientation, shading and your goals, then put the whole scope in writing with line items. The written estimate sets the final price, so there are no change orders once the work starts.
- 3
Permits and ordering. Where the work requires a permit, we handle the application and pull it before anything is ordered. Units are confirmed against the field measurements, and lead times are scheduled around your project rather than the other way around.
- 4
Installation. The old units come out, the openings are prepped and flashed, and the new units go in plumb and square. We seal the perimeter, set the trim and check operation on every sash and door before moving to the next opening.
- 5
Inspection and walkthrough. We confirm inspections pass where they’re required, clean up the site, and walk the finished work with you so you can operate and lock every unit yourself. Any punch-list item gets resolved before we consider the job closed.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Windows & Doors Cost in Richardson?

Impact window installation in Richardson typically runs $8,000 – $25,000 depending on the number of openings, the size of the glass, the panel configuration and how much reinforcing the frames need. Standard window replacement typically runs $4,500 – $15,000, driven mostly by unit count, glass package and whether the existing trim can be reused. A single entry door sits at the lower end of a replacement budget; a whole-house package with large sliding glass doors sits at the upper end.
Three things move the number most. First, opening count and size, since a large fixed unit costs more in materials than a small operating one. Second, the glass specification, because impact-rated laminated glass and high-performance coatings cost more than standard insulated glass. Third, the condition of the surrounding wall, sill and trim, since rot or framing damage has to be repaired before a new unit goes in.
You avoid overpaying by getting the specification in writing before you commit, and by not buying more performance than an elevation actually needs. Every free estimate we provide is a written, line-item quote, so you can see the unit, the glass spec, the labor and the permit cost separately. Permits are pulled and inspections passed as part of the scope, and the work carries a workmanship warranty. Call (844) 320-6637 for an exact quote on your Richardson home.
Windows & Doors Near Richardson – Our Service Area
We work with homeowners throughout Richardson and the surrounding communities, including Plano, Addison, University Park, Farmers Branch, Highland Park, Carrollton, Dallas, The Colony, Frisco, Coppell and Lewisville. Measurement visits are scheduled into the next available opening, Sunday through Friday, 7am to 7pm. If you’re planning a larger project alongside the window or door work, our construction services cover the full scope under one contractor from permit to punch list.
Serving Richardson, TX – Our Local Coverage Area
We serve Richardson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Windows & Doors in Richardson

It covers the installation, replacement and repair of the windows and exterior doors on your home, including frames, glass, hardware and the flashing and trim that seal them to the wall. That spans standard replacement units, impact-rated systems, energy-efficient glass packages, entry doors and sliding patio doors. We handle the measurement, the specification, the permit and the installation, so you’re dealing with one scope rather than several trades.
Most replacement projects take one to three days on site once the units arrive, with larger whole-house packages running longer. The bigger variable is lead time on the units themselves, which depends on the manufacturer and the specification you choose. We confirm the schedule against real lead times during the estimate so you’re not guessing. Call (844) 320-6637 to talk through timing for your project.
Impact window installation typically runs $8,000 – $25,000, and standard window replacement typically runs $4,500 – $15,000, depending on opening count, glass specification and the condition of the surrounding framing. Entry doors and patio doors are priced individually based on size and hardware. Every estimate is free and written line by line, and the written estimate sets the final price. Call (844) 320-6637 for an exact quote.
Yes. We work with impact-rated and performance-tested manufacturers including PGT, CGI, ViewLux and CWS, and we service existing installations from those lines as well as new ones. If your home already has PGT or CGI units and one has failed, we can assess whether the glass, the hardware or the frame is the problem. Whether you have one of those brands or any other make, we can help.
Same-day service is available for measurements and assessments when the schedule allows, though installation itself is a planned project with lead time on the units. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm. Call (844) 320-6637 to get on the schedule.
Yes. Installation work carries a workmanship warranty, and the units themselves carry the manufacturer’s warranty on glass, frames and hardware. We walk you through what each warranty covers during the final walkthrough so you know exactly who to call if something comes up. Permits are pulled and inspections passed as part of the scope on work that requires them.
Clear a path to each opening and move furniture and wall hangings back a few feet from the windows and doors being replaced. Take down curtains and blinds, and secure pets in a room away from the work area. Expect some dust and noise, and plan for the openings to be briefly open to the exterior during the swap. We handle the protection and cleanup; you just need access.
Schedule Your Windows & Doors Service in Richardson Today
Whether you’re replacing fogged units, upgrading to impact-rated glass, or adding a new entry door, we’ll measure it, specify it and put the scope in writing before anything is ordered. The estimate is free, the quote is line-item, and the written estimate sets the final price. Call (844) 320-6637 to schedule yours. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Construction Richardson.












